| Application Scope | |
| Suitable for metal structure, concrete construction, brick surface, asbestos cement, and other solid surface decoration and protection. | |
| Package | |
| 20kg/barrel, 6kg/barrel. | |
| Storage | |
| This product stored at above 0 ℃, well ventilation, shady and cool place. |
Application Step
luorocarbon special primer coating:
1) Mix ( A )Primer coating, ( B ) curinge agent and ( C ) thinner in a barrel according to ratio by weight;
2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred. The main purpose of this primer is to reach the anti-water,and seal the substrate completely and avoid air-bubbles in the body coating;
3) The reference consumption is 0.15kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time;
4) Wait after 24 hours, the next application step to coat the fluorocarbon top coating;
5) After 24 hours, according to the site condition, polishing can be done, this is optionally;
6) Inspection: ensure the paint film is evenly with uniform color, without hollowing.
Fluorocarbon top coating:
1) Mix ( A ) fluorocarbon paint, ( B ) curing agent and ( C ) thinner in a barrel according to ratio by weight;
2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred;
3) The reference consumption is 0.25kg/m2. Rolling, brush or spray the top coating evenly (as the attached picture show) by 1 time;
4) Inspection: ensure the paint film is evenly with uniform color, without hollowing.
Notes:
1) The mixing paint should be used within 20 minutes;
2) Maintain 1 week, can be used when paint is solid absolutely;
3) Film protection: keep away from stepping on, rain, exposing to sunlight and scratching until the film is fully dried and solidified.